Features
Outline
Applications
Washing machine, inversion operation of capacitor motor, and other general controlling devices
Maximum Ratings
Parameter |
Symbol |
Voltage class |
Unit |
Conditions |
14 | ||||
Repetitive peak off-state voltageNote1 |
VDRM |
800 |
V |
Tj = 125°C |
700 |
V |
Tj = 150°C | ||
Non-repetitive peak off-state voltageNote1 |
VDSM |
840 |
V |
|
BCR3PM-14LG
Parameter |
Symbol |
Ratings |
Unit |
Conditions |
RMS on-state current |
IT (RMS) |
3.0 |
A |
Commercial frequency, sine full wave 360° conduction, Tc = 130°C |
Surge on-state current |
ITSM |
30 |
A |
60Hz sinewave 1 full cycle, peak value, non-repetitive |
I2t for fusing |
I2t |
3.7 |
A2s |
Value corresponding to 1 cycle of half wave 60Hz, surge on-state current |
Peak gate power dissipation |
PGM |
5 |
W |
|
Average gate power dissipation |
PG (AV) |
0.5 |
W |
|
Peak gate voltage |
VGM |
10 |
V |
|
Peak gate current |
IGM |
2 |
A |
|
Junction temperature |
Tj |
– 40 to +150 |
°C |
|
Storage temperature |
Tstg |
– 40 to +150 |
°C |
|
Mass |
— |
2.0 |
g |
Typical value |
Isolation voltage |
Viso |
2000 |
V |
Ta = 25°C, AC 1 minute, T1 · T2 · G terminal to case |
Notes: 1. Gate open
Electrical Characteristics
Parameter |
Symbol |
Min. |
Typ. |
Max. |
Unit |
Test conditions | |
Repetitive peak off-state current |
IDRM |
— |
— |
2.0 |
mA |
Tj = 150°C, VDRM applied | |
On-state voltage |
VTM |
— |
— |
1.6 |
V |
Tc = 25°C, ITM = | |
Note2 Gate trigger voltage |
I |
VFGTI |
— |
— |
1.5 |
V |
Tj = 25°C, VD = 6 V, RL = 6 W, RG = 330 W |
II |
VRGTI |
— |
— |
1.5 |
V | ||
III |
VRGTIII |
— |
— |
1.5 |
V | ||
Note2 Gate trigger current |
I |
IFGTI |
— |
— |
30 |
mA |
Tj = 25°C, VD = 6 V, RL = 6 W, RG = 330 W |
II |
IRGTI |
— |
— |
30 |
mA | ||
III |
IRGTIII |
— |
— |
30 |
mA | ||
Gate non-trigger voltage |
VGD |
0.2/0.1 |
— |
— |
V |
Tj = 125°C/150°C, VD = 1/2 VDRM | |
Thermal resistance |
Rth (j-c) |
— |
— |
5.2 |
°C/W |
Junction to caseNote3 | |
Critical-rate of rise of off-state commutating voltageNote4 |
(dv/dt)c |
5/1 |
— |
— |
V/ms |
Tj = 125°C/150°C |
Notes: 2. Measurement using the gate trigger characteristics measurement circuit.
3. The contact thermal resistance Rth (c-f) in case of greasing is
Test conditions |
Commutating voltage and current waveforms (inductive load) |
1. Junction temperature Tj = 125°C/150°C 2. Rate of decay of on-state commutating current (di/dt)c = – 3. Peak off-state voltage VD = 400 V |
Supply Voltage (di/dt)c Main Current Main Voltage (dv/dt)c VD |